MICRO T-2 RED DOT REFLEX SIGHT

MICRO T-2 RED DOT REFLEX SIGHT The Aimpoint® Micro T-2 red dot optic was designed for users who require an extremely rugged, lightweight, and compact sight. The Micro T-2™ optic has unmatched optical clarity and can withstand the physical abuse necessary for demanding end-users. New innovative lenses with cutting-edge reflective coatings, radically improve the shape and clarity of the 2 MOA dot. ACET technology allows 50,000 hours (over 5 years) of constant operation with one CR2032 battery on setting 8. The Micro T-2 optic features recessed lenses with protective flip-up lens covers. The front cover is solid, and rear is transparent – allowing the user to shoot with both eyes open while the lens caps are closed in an emergency situation. The sight housing is constructed of hard-anodized aluminum alloy for optimal protection of the electronic and optical components in all types of environmental conditions. Aimpoint 3XMag-1™ and 6XMag-1™ magnifiers and all generations of night vision devices pair perfectly with the Micro T-2 sight. This optic is sold without a mount. A wide variety of Aimpoint Micro mounts are available through the Official Aimpoint store. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. FEATURES: 2 MOA red dot for precision and fast target acquisition Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 8 Battery type: CR2032 battery (included) Flip-up lens covers – front is solid, and rear is transparent – allowing the user to shoot with both eyes open and lens caps closed in an emergency situation Advanced optical lenses for enhanced light transmission and ultimate dot clarity Reinforced protection of the turrets for even greater ruggedness Hard anodized non-reflective surface 12 brightness settings: 1 off position, 4-night vision compatible settings, and 8 daylight settings 1X (non-magnifying) operationally parallax free optic Submersible to 80 feet (25 meters) Temperature span -49°F to +160°F Weight 3.0 oz / 84 g (sight only) SPECIFICATIONS: Operating Principle: Reflex Collimator sight with LED Optical Magnification: 1x Aiming Dot Size: 2 MOA Dot Intensity: Visible against a background luminance of 0.1 to 55,000 1x Optical Signature: No optical signature is visible at 10-meter distance, front side, on appropriate settings with NVD Dot Color: Peak Wavelength: 655 ± 15 nm NVD Compatible: Yes Optical Coating: Anti-reflex, all surfaces and multi-layer. NVD Compatible. Clear Aperture: 18 mm (.71 in) Eye Relief: Unlimited Battery Type: 3V lithium battery, type CR2032 Battery Life: Day time use: 5 years (50,000 h) of continuous use at pos. 8, over 10 months at pos. 10, and more than 500,000 hours at NVD-settings (pos. 1-4) Power Intensity: 4 NVD and 8 Daylight, of which 1 extra bright Size L x W x H (mm) Sight Only: 68 x 41 x 36 mm Size L x W x H (in) Sight Only: 2.7 x 1.6 x 1.4 in Size L x W x H (mm) Conf: 79 x 41 x 47 mm Size L x W x H (in) Conf: 3.1 x 1.6 x 1.9 in Weight (Sight Only): 94 g / 3.3 oz Weight (Conf): 130 g / 4.6 oz (Includes lens covers & mount) Housing Material: High Strength Aluminum Housing Anodized: Yes Material Mount & Spacer (Standard Conf): High strength aluminum Material Lens Cover: Thermoplastic Elastomer (TPE) Height of Optical Axis: Sight and mount – 20 mm (0.8 in) measured from top surface of Picatinny/Weaver rail Sight, mount and low spacer – 30 mm (1.2 in) measured from top surface of Picatinny/Weaver rail Sight, mount and high spacer – 39 mm (1.2 in) measured from top surface of Picatinny/Weaver rail Adjustment: Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation, 1 click = 13 mm at 100 meters = 10 mm at 80 meters = .4 in at 100 yds